How to dump & build your nand for dash 17150

Caboose

New Gamer

Downloads:
XeBuild 17150: xeBuild_GUI_2.095
Simplenand Flasher + flash360: Simple 360 NAND Flasher and Flash360
Dashlaunch 3.14: http://www.homebrew-connection.org/files/xbox/system_apps/DashLaunch/dl_dash_launch_v3.14.zip
Xblse 17150 offline files to go on xbox live: XBLStealth
*those are not the best offline files to use, I personally use XPgamesaves offline files, kv's last days*

If you want to know how to dump your nand it's very simple!
1. Put Simplenandflasher on the root of your hdd, execute the default.xex
2. Once the app is opened, it will tell you exactly how to dump your nand
3. once your nand is dumped put your dump onto your computer and follow the vid tut above to upate your nand.

Want to flash your built nand? It's simple!
1. When you have your nand image built, put your upd file into the SimpleNandFlasher folder
2. Execute the default.xex
3. You will see a option that says flash your nand using simplenandflasher
4. Do that and when your console turns off, unplug the power brick from your console for 15-30secs
5. Why are you doing that you may ask, because on a VERY RARE occasion, there could be a short circuit that sends power to your console very quickly when it turns off, thus corrupting your nand, and you could get a bricked console as a result..
6. Plug your power brick back up to your modded console and turn it on, ta da, if done correctly your console should boot and turn on.
 
Last edited by a moderator:

LAMENTOOL MODZ

New Gamer
i have one problem , when i use simplenandflasher , this dump my nand but when i put this inside xebuild send me error format
 

Vrinity

Striving for Success
Ok so I copied your step Exactly and I have a Corona 4G Console. Now my console wont boot up, The green light turns on but Nothing else Happens :/
 

Caboose

New Gamer
Ok so I copied your step Exactly and I have a Corona 4G Console. Now my console wont boot up, The green light turns on but Nothing else Happens :/
You have to wait. Your boot time might be horribly slow, if you don't see a red dot. Then your console is fine. If you hear a beeping sound thn you are good to go. If you unplugged yours console too early, your console could be fucked
 

Caboose

New Gamer
Nope, just not starting at all :(
Then you did something wrong, unplug your hdd and try to boot it again, if that doesnt work make sure your component cable is plugged in all the way. If you hear no beeping it means your console is not glitching at all. Which is why it is not booting period.
 

LAMENTOOL MODZ

New Gamer
[QUOTE = "Caboose, posta: 8989, membro: 2177"] Poi guarda l'intero video, ho poi mostro nel video come costruire un nand corona [/ QUOTE]
ma il mio è corona 250 gb
 

Caboose

New Gamer
[QUOTE = "Caboose, posta: 8989, membro: 2177"] Poi guarda l'intero video, ho poi mostro nel video come costruire un nand corona [/ QUOTE]
ma il mio è corona 250 gb
Your HDD Size has nothing to do with building your nand. If your nand is a 4gb nand it will be labeled corona4gb
 

Tettey

Newbie
hi guys i cant update my xbox even after following all tutorials in the world and on youtube. My console is labelled Trinity on the xebuild after i dump the nand and wants continue on xebuild. Whats wrong? Kenel version is always custom. i cant change it.
 
Top